School Assembly Program Header
 

Show Setup

This setup can be printed for use print setup for more instructions than listed below go to show instructions.


Size Requirements The
preferable size show area is 40'X60'. However, the picture above is a pre-show set up size for 500 to 600 students. Some schools have students seated on the ground while others allow them to bring their chairs. If you are doing show indoors the general rule has been to seat the students around the area as illustrated above starting from the outside first and working inward. Whatever space that's is left is ours to work with. Sometimes the area is tight, but we are capable of making it work. We are Professionals!!!

Set-up & Time The general flatland & ramp show set-up time is approx.15 minutes or less. Most importantly is getting power or being set up within extension cords length away for a power source. To reduced set up time be sure that any access gates are unlocked and ready for the teams.

The Surface: If the surface is either sweeped or cleaned with a blower it will really improve the riders ability to perform.

Shows - Outdoors  Size 60' X 40' this particular set up is a flatland (no ramps)



This set up is approx. 700 students this particular set up is a flatland (no ramps)


 

Shows - With Ramps 40' X 100' This set up is our California ramp show set up. It will generally include two ramps quarter pipe (blue) and box jump (red) A Box Jump only show is available in Midwest, and East Coast regions




Half Pipe Box Jump



picture

Shows - Indoors - With Small Ramp lunch rooms, gyms stages the area size is flexible. This show is made available in North East and Mid West




Last resort ! we will hit the stage this is where we end up in cases of rain, snow.




 




Perfection on Wheels BMX Stunt Team
©2008 - 2009 perfectiononwheels.com